Kemal Davut, Yrd. Doç. Dr.

Kemal Davut

İletişim Bilgileri

Telefon:8873
Telefon:8860
Ofis:i103
Bağlı Olduğu Bölüm:Metalurji ve Malzeme Mühendisliği Bölümü
http://msmm.atilim.edu.tr/personel/personInfo/id/286?lang=tr
Özgeçmiş

Akademik Dereceler

DereceAlanÜniversiteYıl
Doktora Malzeme Mühendisliği Max-Planck-Enstitüsü, Düsseldorf, Almanya ve RWTH Aachen Üniversitesi 2013
Yüksek Lisans Metalurji ve Malzeme Mühendisliği Ortadoğu Teknik Üniversitesi 2006
Lisans Metalurji ve Malzeme Mühendisliği Ortadoğu Teknik Üniversitesi 2004


Akademik Ünvanlar

DereceÜniversiteAyYıl
Yardımcı Doçent Atılım Üniversitesi Mart 2015


Araştırma Konuları

Metalografi, Demir alaşımlarında faz değişimleri, demir ve aluminyum alaşımlarının ısıl işlemleri, Elektron Geri-saçılım kırınımı tekniği, Manyetik Barkhausen Gürültüsü , Dönüşüm Etkili Yoğruklanmış Çelikler (TRIP Çelikleri), Çift Fazlı Çelikler (DP çelikleri), İkizlenme Etkili Yoğruklanmış Çelikler (TWIP Çelikleri), Q & P Çelikleri, İleri (yeni nesil) Yüksek Dayançlı Çelikler, Hasar ve İşgörmezlik Analizleri, Kristalografik Doku Analizi , Mikro-Doku Analizi


Yayınlar

SCI, SCI-E, SSCI ve AHCI

G. Karacalı, K. Davut (2016), EBSD-based Analysis of the Relation between Oxide Scale Microstructure and Pickling Characteristics of a Commercial Hot Rolled Strip, Microscopy and Microanalysis (Conference Special Issue), Columbus, OH, USA, 22, pp. 1940 - 1941

K. Davut, S. Zaefferer (2015), The Reliability of EBSD-based Microstructure Analysis, Microscopy & Microanalysis (Conference special issue), Portland, OR, USA, 21 (S3), pp. 2269-2270

O. Elkoca, K. Davut (2015), Metallographic Sample Preparation and Characterisation of Oxide Scales on Hot-Rolled Steel Strips, Microscopy & Microanalysis (Conference special issue), Portland, OR, USA, 21 (S3), 2269-2270

K. Davut, S. Zaefferer (2012), The effect of size and shape of austenite grains on the mechanical properties of a low-alloyed steel, Steel Research International, 83(6), pp. 584-589

K. Davut, S. Zaefferer (2010), Statistical reliability of phase fraction determination based on electron backscatter diffraction (EBSD) investigations on the example of an Al-TRIP steel, Metallurgical and Materials Transactions A, 41A, pp. 2187-2196

K. Davut, C.H. Gür (2010), Monitoring the microstructural evolution in spheroidized steels by magnetic Barkhausen noise, Journal of Nondestructive Evaluation, 29, pp. 241-247

K.Davut, C.H. Gür (2007), Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic Barkhausen noise, Journal of Nondestructive Evaluation, 26, pp. 107-113

Diğer Hakemli Dergiler

B. Çetin, H. Meço, K. Davut, E. Arslan, M.C. Uzun (2016), Microstructural Analysis of Austempered Ductile Iron Castings, Hittite Journal of Science and Engineering, 3(1), pp. 29-34

K. Davut, S. Zaefferer (2012), Improving the Reliability of EBSD-based Texture Analysis by a New Large Area Mapping Technique, Materials Science Forum, 702-703, pp. 566-569

K. Davut, S. Zaefferer (2011), The effect of texture on the stability of retained austenite in Al-alloyed TRIP steels, MRS Proceedings, 1296

Uluslararası Konferans Bildirileri

E. Arslan, Ö.F. Murathan, K. Davut, V. Kılıçlı (2016), Evaluation of the Microstructure of AISI D2 Steel by Magnetic Barkhausen Noise Technique, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp. 381-384

B. Yazır Terzi, G.E. Evcil, S. Yıldız, K. Davut, C. Şimşir (2016), Sensitivity Analysis of Distortion of Carburized Steel Shafts Using Computer Simulations, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp. 385-388

H. Yılmaz, B. Yazır, G.E. Evcil, S. Yıldız, C. Şimşir, K. Davut (2016), Determination of Factors Influencing Distortion of Carburized Quenching of Steel Shafts Using DoE with Computer Simulations, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp.932-935

S. Yıldız, H. Yılmaz, B. Yazır, G.E. Evcil, C. Şimşir, K. Davut (2016), Determination of Isothermal Austenite Grain Growth Model Parameters for SAE 8620H Carburizing Steel, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp. 485-488

K. Davut, B. Çetin, E. Arslan, H. Meço, C. Yazganarıkan (2016), Nodularity and Nodule Count Analysis of Austempered Ductile Iron Castings by Digital Image Processing, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp.497-500

G. Karacali, K. Davut, D. Çimen, Ü. Başkaya (2016), EBSD-Based Analysis of Oxide Scales Formed on a Hot Rolled Strip, Proc. Of 18th Int. Metallurgy and Materials Congress (IMMC 2016), İstanbul, Turkey, pp. 515-517

Ömer Faruk MURATHAN, İsmail OVALI , Volkan KILIÇLI, Kemal DAVUT (2016), Effect Of Matrix Microstructures On Wear Behavior Of High Silicon Spring Steel, Proc. 16th International Materials Symposium IMSP'2016, Pamukkale, Denizli, Turkey, pp. 639 - 646

H. Hızlı, K. Davut, C. Şimşir, C.H. Gür (2016), Nondestructive Monitoring of the Variations in Microstructure and Residual Stress in the Carburized Steels, 19th World Conference on Non-Destructive Testing, Munich, Germany

E. Billur, B. Çetin, R.O. Uguz, K. Davut, E. Arslan (2016), Advanced Material Characterization of TWIP Steels, New Developments in Sheet Metal Forming (NEBU-2016), Stuttgart, Germany, pp. 303-318

Ö.F. Murathan, V. Kılıçlı, K. Davut (2016), Development of Carbide Free Bainite + Martensite Duplex Structure in Commercial High Silicon Spring Steel, International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Turkey, pp. 634-637

Ö.F. Murathan, V. Kılıçlı, K. Davut (2015), Effect of Austempering Heat Treatments on Microstructure and Mechanical Properties of AISI 9254 Commercial Spring Steel, 2nd International Iron and Steel Symposium (IISS'15), Karabük, Turkey, pp. 619 - 622

E. Arslan, K. Davut, C. Şimşir (2015), Optimization of Sensitivity and Reliability of Magnetic Barkhausen Technique for Detecting Hardness Differences on Quenched and Tempered AISI 4140 Steels, 11th Int. Conf. on Barkhausen Noise & Micromagnetic Testing (ICBM-11), Kuşadası, Turkey

V. Kılıçlı, M. Erdoğan, K. Davut, Z. Öztürk, C. Şimşir (2015), Characterization of Microstructure of Austempered Low-alloy White Cast Iron by Magnetic Barkhausen Noise Technique, 11th Int. Conf. on Barkhausen Noise & Micromagnetic Testing (ICBM-11), Kuşadası, Turkey

K. Davut, V. Kılıçlı, Ö.F. Murathan, E. Arslan, C. Şimşir (2015), Non-destructive Characterization of Prior Austenite Structure of AISI D2 Tool Steel by Magnetic Barkhausen Noise Technique, 11th Int. Conf. on Barkhausen Noise & Micromagnetic Testing (ICBM-11), Kuşadası, Turkey

M.E. Tamer, K. Davut, O. Music, İ. Durgun (2015), Using Barkhausen Noise Technique for the Prediction of Properties of Components Manufactured by Incremental Sheet Forming, 11th Int. Conf. on Barkhausen Noise & Micromagnetic Testing (ICBM-11), Kuşadası, Turkey

K. Davut, Z. Öztürk, C. Şimşir (2015), Evaluating the Stress State of Steels by Simultaneous X-ray Diffraction and Magnetic Barkhausen Noise Measurements during Four-point Bending Tests, 11th Int. Conf. on Barkhausen Noise & Micromagnetic Testing (ICBM-11), Kuşadası, Turkey

Y. M. Arısoy, T. Özel, C. Guo, K. Davut, B. Kaftanoğlu (2015), Modeling of Microstructural Changes due to Machining Process on Nickel Superalloy Surfaces, 8th Int Conf and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası, Turkey

D. Çimen, G. Karacalı, O. Elkoca, K. Davut (2015), Comparison of Reliability of EBSD and XRD Techniques for Phase Fraction Determination of a TRIP-Steel, 3rd Int. Multidisciplinary Microscopy and Microanalysis Congress, Muğla, Turkey

K. Davut, T. Demirtaş, C. Şimşir (2014), Determination of the Optimum Magnetic Barkhausen Noise Measurement Parameters for Evaluating the Microstructure of Quenched and Tempered AISI 4140 steels, Proc. of 17th Int. Metallurgy and Materials Congess (IMMC 2014), İstanbul, Turkey, pp. 389-396

O. Müştak, K. Davut, C. Şimşir, C.H. Gür (2014), Determination of Flow Curves of Metastable Austenite, Proc. of 17th Int. Metallurgy and Materials Congess (IMMC 2014), İstanbul, Turkey, pp. 464-470

K. Davut, S. Zaefferer (2014), Microstructural Parameters Affecting the Macroscopic Mechanical Response of a Low-alloyed TRIP steel, 2nd International Metal Forming Conference (METFORM 2014), Ankara, Turkey

O. Müştak, K. Davut, C. Şimşir, C.H. Gür (2014), Experimental Investigation of Transformation Plasticity of SAE 52100 Steel, 2nd International Metal Forming Conference (METFORM 2014), Ankara, Turkey

K. Davut, T. Demirtaş, C. Şimşir (2014), The Effect of Measurement Parameters on the Sensitivity of Magnetic Barkhausen Noise Technique: An Example of Hardness Difference between Quenched and Tempered AISI 4140 Steels, 2nd International Metal Forming Conference (METFORM 2014), Ankara, Turkey

M.E. Tamer, K. Davut, O. Music, İ. Durgun (2014), Investigation of Plastic Strains in Incremental Sheet Forming by Hardness Tests, 2nd International Metal Forming Conference (METFORM 2014), Ankara, Turkey

K. Davut, S. Zaefferer (2011), Factors influencing the strain-induced transformation of residual austenite in a low-alloyed TRIP stee, Euromat 2011, Montpellier, France

K. Davut, S. Zaefferer (2011), Improving the Reliability of EBSD-based Texture Analysis by a New Large Area Mapping Technique, ICOTOM 16, Mumbai, India

K. Davut, S. Zaefferer (2011), A new large-area mapping technique to improve the statistical reliability of EBSD datasets, Royal Microscopy Society - EBSD 2011 Meeting, Düsseldorf, Germany

K. Davut, S. Zaefferer (2010), Relation between damage nucleation and microstructure in TRIP steels, Materials Science and Engineering (MSE) 2010 - DFG Congress, Darmstadt, Germany

K. Davut, S. Zaefferer (2010), Statistical Reliability of EBSD Data Sets for the Characterization of Al-alloyed TRIP Steels, Proceedings of the 15th International Metallurgy and Materials Congress, İstanbul, Türkiye

K. Davut, S. Zaefferer (2010), The effect of texture on the stability of retained austenite in Al-alloyed TRIP steels of Al-alloyed TRIP Steels, MRS 2010 Fall Meeting, Boston, MA, USA

K. Davut, S. Zaefferer (2010), Statistical Reliability of Phase Fraction Determination based on EBSD investigations (ex: TRIP steel), Royal Microscopy Society - EBSD 2010 Meeting, Derby, UK

K. Davut, C.H. Gür (2009), Monitoring the Microstructural Evolution in Spheroidised Steel by Magnetic Barkhausen Noise Measurement, 7th International Conference on Barkhausen Noise & Micromagnetic Testing (ICBM 7), Aachen, Germany

K. Davut, S. Zaefferer (2009), Phase fraction and texture quantification of Al-TRIP steel from EBSD data, 3rd International Conference on Texture and Anisotropy of Polycrystals (ITAP-3), Göttingen, Germany

K. Davut, C.H. Gür (2008), Non-destructive Characterization of Pearlite Spheroidization by Magnetic Barkhausen Noise Method, Proceedings of the 17th World Conference on NDT, Shanghai, China

K. Davut, S. Bayramoğlu, G. Gürer, C.H. Gür (2007), Nondestructive Characterization of Spheroidised AISI 1060 Steel by Magnetic Barkhausen Noise Measurements, 6th International Conference on Barkhausen Noise & Micromagnetic Testing (ICBM 6), Valenciennes, France, pp. 123-129

K. Davut, C.H. Gür (2007), Investigating the Efficiency of Magnetic Barkhausen Noise Method for Determining Average Grain Size of Steels, 6th International Conference on Barkhausen Noise & Micromagnetic Testing (ICBM 6), Valenciennes, France, pp. 113-122

K. Davut, C.H. Gür (2006), Su verilmiş SAE 1040 çeliğinde menevişleme sıcaklığının içyapıya etkisinin manyetik Barkhausen gürültüsü yöntemi ile tayini, Proceedings of the 13th International Metallurgy and Materials Congress, İstanbul, Turkey, pp. 419-426

K. Davut, C.H. Gür (2006), Characterisation of Quenched and Tempered Steels by Magnetic Barkhausen Noise Method, Proceedings of the 9th European Conference on NDT, Berlin, Germany, P.180

K. Davut, C.H. Gür (2006), Manyetik Barkhausen Gürültüsü Yöntemi ile Çeliklerde Tane Boyutunun Tayini, Proceedings of the 11th Denizli Materials Symposium, Denizli, Turkey, pp. 893-898

K. Davut, C.H. Gür (2005), Su verilmiş ve menevişlenmiş SAE 4140 çeliğinde manyetik Barkhausen gürültüsü yöntemi ile Tahribatsız iç yapı karakterizasyonu, Proceedings of 12th International Metallurgy and Materials Congress, İstanbul, Turkey, pp. 896-902

Ulusal Konferans Bildirileri

C.G. Erhuy, F. Ateş, U. İnce, A. Bıyık, K. Davut (2015), Projeksiyon Kaynağında Fışkırma ve Çapaklanma Düzeyinin Tanımlanmasına Yönelik Sayısal Bir Göstergenin Geliştirilmesi Üzerine Deneysel Bir Çalışma, IX. Kaynak Teknolojisi Ulusal Kongre ve Sergisi, Ankara, Turkey

K. Davut, C.G. Erhuy, A.S. Ecer, M. Mete (2015), Projeksiyon Kaynak Somunlu Ara Soğutucu Braketinde Hasar Analiz Sonuçlarına Göre İmalat Parametreleri Değiştirilerek Yapısal Performansın İyileştirilmesi, IX. Kaynak Teknolojisi Ulusal Kongre ve Sergisi, Ankara, Turkey

Kitaplar

Kemal Davut (2013), Relation between Microstructure and Mechanical Properties of a Low-alloyed TRIP steel, Shaker Verlag, Aachen, Aachen